27
ESP-LXD Controller
C
The PBC Main Menu appears. Press the Down Arrow button to
select Test Barcode Pen; then press Next.
D
The PBC Test Barcode Pen screen appears with instructions.
c
d
E
Scan any station Number Barcode (as shown on pages 6-25 of
the Programming Guide). You’ll hear an audible beep to confirm
when the scan was successful.
F
The Success! screen will appear and the station # field will display
the station number of the scanned barcode.
e
f
NOTE:
Return the Programming Guide to a permanent, safe
location when you’re finished working with it. We recommend
hanging it on the hook inside the controller cabinet door.
Scan Field Decoder Addresses
Set up field decoders automatically by scanning.
CAUTION:
Barcode scanning replaces any previous decoder
addresses stored in the controller. Be sure to complete the
previous Test Barcode Scanning Pen process before starting as the
test process will not update or replace your decoder addresses.
G
Ensure that the station Decoder Address Labels are affixed in the
proper locations on the Programming Guide.
g
Turn the controller dial to ETM/IQ/PBC Settings.
Содержание ESP-LXD
Страница 1: ...ESP LXD Controller Programming Guide...