RAIMONDI BERTA ADV, Руководство пользователя

Страница: 7 / 15

ENGLISH BERTA ADV ELECTROSPONGE
7
Dosing water in the sponge roller
To increase or reduce the moisture content of the sponge roller, proceed as follows:
-
shift the lever (A) to its upright position (figure 2 - page 6)
- raise the stopping spring (B - figure 5) and remove it;
- loosen the nut (C - figure 6);
-
tighten the fork (D - figure 7) to reduce the amount of water in
the sponge roller; loosen the fork to increase the amount of
water;
-
refit the stopping spring (B – figure 5) and tighten the nut (C -
figure 6).
Tools
“AVANA” sponge roller with medium absorption properties for cement based sealants.
“SWEEPEX” sponge roller with high absorption properties for cement based sealants.
“CELLULOSE” sponge roller for epoxy resin based sealants.
CELLULOSE SPONGE ROLLER FOR EPOXY PRODUCTS
Before fitting the roller, to prevent it getting damaged, soak it in cold and clean water for at least 1 minute.
F
IG
. 5
F
IG
. 6
F
IG
. 7
B
C
D