RAIMONDI BERTA ADV, Руководство пользователя

Страница: 4 / 15

BERTA ADV ELECTROSPONGE ENGLISH
4
Before leaving the factory, the machine you have purchased undergoes a series of tests to ensure
quality, safety and efficiency.
If you follow the instructions in this manual carefully, under normal operating conditions, your ma-
chine will last a long time.
Before using the machine, read this manual carefully in order to prevent accidents and malfunction-
ing.
Use
The “BERTA ADV” electrosponge has been designed to clean floors during the grouting of floor tiles.
The machine cleans away excess grout and epoxy sealant, whilst smoothing the joints between tiles.
The machine is suitable for use on floors tiles with terracotta, ceramics, vitrified stoneware, marble, porphyry,
etc.
Precautions
Never leave the machine unattended or within the reach of children.
Keep the working area clean and well lit. Never expose the machine to rain.
Machine noise emission levels under working conditions are provided in the “TECHNICAL DATA” paragraph.
For more detailed information, also see Italian Law 277/91.
Before plugging the machine into the mains socket, make sure that the power supply voltage is compatible
with rating plate specifications.
If it is not compatible, do not plug in the machine and contact an authorised service centre or your dealer.
Always use an effectively grounded cable to hook up the machine. When in doubt, do not plug the ma-
chine in.
Technical data
OPERATING WEIGHT DIMENSIONS SPEED
BERTA
29 KG 660 X 550 X 500 MM 1
The noise emitted by the machine described in this manual was measured in compliance with the ISO 3754-
77 and ISO CD 11201-91 standards on production samples.
K = 2 [ db ], pR EN 848-1
Lw 80.1 [dBw(A) 0.1 [mW(A)] Lop 68.1 [dB(A) 77.8 [mW(C)]
230 V ~ 50Hz 120 W
1.2A 2800 n
-1
MOTOR CLASS F
110 V ~ 50/60Hz 120 W
2.5A 2800-3360 n
-1
MOTOR CLASS F