14
PRR S-2 Turbine Operating Instructions
You may have to go through the entire
FYS sequence several times before you
clearly identify this sound. After the
rumbling highlight is played, the freight
yard sounds heard in Event 1 will continue
to play.
Event 3:
Interrupt the transformer
throttle again to cycle the engine
from reverse back to neutral. FYS
confirms that the engine is now in
neutral by sounding two quick air
releases. This is followed
approximately two seconds later by
a man whistling and continued
freight yard loading and unloading
sounds.
Event 4:
Interrupt the transformer throttle again to complete the FYS
feature and cycle the engine into forward. FYS confirms it has entered
forward by playing the sound of the freight car door closing. Within two
seconds, the whistle will sound two short blasts (three if entering reverse),
and the bell will begin to chime. After a few chimes of the bell, the engine
will begin moving in forward with the bell continuing to ring. A few
seconds later, the bell will turn off,
and the engine will resume normal
operation.
Note:
When entering the Forward
phase of FYS, it is important to set the
transformer throttle at a high enough
setting that will allow the engine to
begin moving once FYS automatically
activates the motors. Otherwise the
engine will just sit still until you increase the transformer throttle setting on the
transformer. However, don’t set the throttle setting too high or the engine will go
racing away faster than you might expect.
Listen For Rumbling
Box Car Door Sound
Interrupt Throttle To
Enter The Next Phase
DIRECTION
B E L L
HORN
WHISTLE
POWER
R
K
AIL ING
By MTH Electric Trains
®
Listen For Two
Quick Air Releases
Interrupt Throttle To
Enter The Next Phase
DIRECTION
B E L L
HORN
WHISTLE
POWER
R
K
AIL ING
By MTH Electric Trains
®
Listen For The Sound
of Freight Door Closing
Interrupt Throttle To
Enter The Next Phase
DIRECTION
B E L L
HORN
WHISTLE
P O W E R
R
K
AIL ING
By MTH Electric Trains
®
