Connecting the Transformer
Lubricating the Engine
You must lubricate the engine before operating it. Use a light household oil and
follow the lubrication points marked “L” in Fig. 3 on Page 11. Do not over oil.
Use only a drop or two on each pivot point.
Coupling the Engine and Cars
Our couplers are designed for realistic operation. Place the engine and cars on
the track and couple them together. If the coupler is already closed, press down
on the small finger that extends from under the right side of the coupler to open
the coupler knuckle and allow the couplers to interlock as shown in Figure 1.
The transformer included with this set provides
an easy-to-use, safe power source for AC-powered trains and accessories.
To complete the connection between the track and the transformer, simply plug in the
color-coded wire harness that was included in your set and plug the transformer into your
wall outlet.
!
Plug the wire from the transformer into the Z-Controller’s center port.
!
Connect the Wires from the Z-Controller to the Lighted Lock-On, being sure that
the wires are connected from red-to-red and black-to-black.
!
Unplug when not in use
-7
50
D
IR
EC
TI
O
N
B
EL
L
H
O
R
N
W
H
IS
TL
E
P
O
W
ER
AI
L
IN
G
R
K
B
y
M
T
H
E
le
ct
ric
T
ra
in
s
®
TR
AN
SF
OR
ME
R C
ON
TR
OL
LE
R
O
FF
FULL
POWE
R
Also functions as a binding post.
Red Harness
Wire/Plug
Red Harness
Wire/Plug
Black Harness
Wire/Plug
Black Harness
Wire/Plug
Figure 1: Coupling the Passenger Cars together
RailKing F-3 R-T-R Passenger Set with Proto-Sound® 2.0
5
