RailKing Dreyfuss Steam Engine
15
The locomotive’s lights are controlled by a constant voltage circuit in the engine. They
are easy to remove and replace when they burn out. See the diagrams and directions
below for instructions on accessing and replacing the light bulbs in this locomotive.
You can obtain replacement bulbs directly from the M.T.H. Parts Department (phone:
410-381-2580; e-mail: [email protected]; mail: 7020 Columbia Gateway Drive,
Columbia MD 21046-1532)
1. To replace the headlight in this model you will need to follow the disassembly
instructions for greasing the engine in figure 5a on pg. 11. Once the boiler has been
removed you can access the headlight and firebox lights (see figure 8and 9).
2. Remove the bulbs by gently unscrewing them.
3. Reassemble in reverse order, being careful not to pinch any wires.
Headlight Bulb
Figure 8: Headlight Location
Light Bulb Replacement Instructions
Firebox Light
Figure 9: Firebox Light
