RailKing Dreyfuss Steam Engine
19
1. Once the boiler has been removed, locate the smoke unit assemby (see Figure 15).
2. Use a phillips head screwdriver to remove the inspection cover screws as seen in
Figure 16.
3. After removing the
inspection cover, inspect
the wick. If it is darkly
discolored and hard, it
should be replaced.
Replacement parts and
wick replacement
instructions are
available directly from
the M.T.H. Parts
Department phone:
(order online:
www.mth-railking.com,
e-mail:
[email protected]
; mail: 7020 Columbia
Gateway Drive,
Columbia MD
21046-1532, FAX: 410-381-6122).
Smoke Unit Location
Figure 15
Inspection Cover
Screws
Figure 16
