Raider RDP-ID27, Руководство пользователя

Страница: 11 / 64

11
General guidelines for safe operation.
Read all instructions carefully. Failure of
the nature following instructions can cause
electric shock, fire and / or severe injuries.
Keep these instructions in a safe place.
1. Safety in the workplace.
1.1. Keep your workplace clean and well lit.
Disarray and poor lighting may contribute to
the occurrence of an accident.
1.2. Do not operate in an environment
where the impact drill with an increased risk
of an explosion in the vicinity of flammable
liquids, gases or powders.
During operation of the impact drill can be
separated sparks that can ignite powders or
fumes.
1.3. Keep children and bystanders at a safe
distance while working with the impact drill.
If your attention is diverted, you may lose
control over the impact drill.
2. Safety when working with electricity.
2.1. Plug of the impact drill must be suitable
for contact. In no case is allowed to modify
the structure of the plug. When working with
electrical zero, do not use plug adapters.
Using original plugs and sockets reduces
the risk of electric shock.
2.2. Avoid touching your body to earthed
bodies, e.g. pipes, heaters, stoves and
refrigerators. When your body is grounded,
risk of electric shock is greater.
Protect your impact drill from rain and
moisture.
Penetration of water into the impact drill
increases the risk of electric shock.
2.3. Do not use a power cord for the
purposes for which it is not provided, e.g. to
bear the impact drill for cable or removing
the plug from the outlet. Protect cords from
heat, oil, contact with sharp edges or points
of mobile machines.
Damaged or twisted cables increase the
risk of electric shock.
2.4. When you work with the impact drill
out, switch the machine only in installations
equipped with electric switch “Fi” RCD
(Residual Current Device). RCD must be no
more than 30 mA. Use an extension cord
suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of
electric shock.
2.5. If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply. Use
of an RCD reduces the risk of electric shock.
3. Safe way of working.
3.1. Be concentrated, watch their actions
carefully and act cautiously and prudently. Do
not use the impact drill, when you are tired
or under the influence of drugs, alcohol or
narcotic drugs.
A moment of distraction at work impact
drill may have the effect of extremely serious
injuries.
3.2. Work with protective work clothing
and always with safety glasses.
Wearing suitable for drilling and the
activities of personal protective equipment,
such as respiratory masks, healthy, tightly
closed shoes grapple with a stable, protective
helmet and silencers (hearing protectors),
reduces the risk of accident.
3.3. Avoid the danger of switch on the
impact drill inadvertently. Before you turn the
plug into the power supply network, make
sure the trigger switch is in position “off”.
If, when you carry the impact drill, keep your
finger on the trigger switch, or if you submit
a voltage of the impact drill, where it is
included, there is the risk of accident.
3.4. Before you turn on the impact drill,
make sure that you have removed all of her
utilities and wrenches.
Utilities, forgotten rotating unit can cause
injuries.
3.5. Avoid unnatural positions of the body.
Work in a stable position of the body at any
time and keep the balance. So you can control
the impact drill better and safer if unexpected
situations arise.
3.6. Work with appropriate clothing. Do
not operate with loose clothing or ornaments.
Keep your hair, clothes and gloves at a safe
distance from rotating units of the impact
drill. Robes, jewelry, long hair can be caught
and carried away by chuck.
3.7. If possible use an external aspiration
system, make sure it is switched on and
functioning properly. Use of the aspiration
system reduces the risks due to the discharge
dust at work.
4. Care to impact drill.
4.1. Do not overload the impact drill. Use
only the impact drill in accordance with its
intended purpose. Will operate better and
safer when using the appropriate impact drill
manufacturer in the specified range of load.
4.2. Do not use impact drill, whose starting