Raider RD-T12, Руководство пользователя, Страница: 33 / 94

33
TRANSPORT WHEEL:
The wheel is lowered and the depth adjuster tilts upwards when transporting the machine. Tilt the machine
forward until the blades clear the ground. Press or pull the appliance to the next location.
PROCESSING:
The cultivation digs, flips and breaks the garden soil and prepares the planting bed. And the machine will also
clear the soil of unwanted vegetation. The decomposition of this plant matter enriches the soil.
If the soil is too hard, it must be preformed before cultivation (moistened or loosened) to avoid damage to the
plow or other parts of the machine.
Also, soil that is too moist will produce unsatisfactory lumps. Wait a day or two after heavy rain. The soil should
dry.
Do not use the machine in case of heavy, wet clay. This can result in permanent damage to the machine.
Better growth will be achieved if an area is properly cultivated and used shortly after cultivation to maintain.
moisture content. The type of soil and working conditions will determine the actual setting of the tillage depth.
In some soils, the desired depth is reached first through the garden. In other soils, the desired depth is achieved
by running the garden two or three times. In the latter case, the depth regulator rotor must be lowered before
each subsequent passage through the garden. Walkways must be made consecutively along the length and width
of the garden. Do not try to dig too deep into the first pass. If the machine skips or stalls, allow the machine to
move forward at a slightly higher speed. If the machine interrupts forward and tries to dig in one place, shake the
handles from side to side to start moving forward again. Rocks that appear should be removed from the garden.
CARE AND MAINTENANCE:
In order to ensure the proper functioning of the machine, it must be checked and adjusted by qualified
personnel at an authorized service center at least once a year.
Proper maintenance is essential for safe, economical and trouble-free operation of the machine.
Failure to follow maintenance instructions and precautions can result in serious injury or death. Always follow
the procedures, precautions, recommended maintenance and recommended checks mentioned in this guide.
Before any work on the machine (maintenance, inspection, replacement of accessories, service) or before
storing it, ALWAYS shut off the engine, wait for all moving parts to stop and allow the machine to cool down. Avoid
accidental starting of the engine. Turn off the candle.
THESE WARNINGS ARE NOT REPEATED AT THE NEXT POINTS!
Keep this recommendation for the checks, maintenance and intervals specified in this user guide. Other
service operations that are more complex or require special tools are left to our authorized service facility.
MAINTENANCE OF THE MACHINE:
• Keep the machine in good condition.
• Careful handling and regular cleaning ensure that the machine remains functional and efficient for a long time.
• In the case of abnormal vibrations, follow the instructions (see troubleshooting instructions).
• Keep all nuts, bolts and screws tightened to make sure the equipment is safe working condition.
• Always make sure that the vents are kept away from dirt.
• Replace worn or damaged safety parts. Only use original spare parts.
ENGINE MAINTENANCE INSPECTION AND MAINTENANCE PLAN
If the engine is to be tilted during maintenance, the fuel tank must be empty. The spark plug should always be
up. If the fuel tank is not empty and the engine is tilted differently and in different directions, then it can be difficult
to start due to the presence of oil and gasoline that clog the inappropriate parts of the engine, contaminate the
air filter, spark plug and more.