Raider RD-ST02, Руководство пользователя

Страница: 21 / 110

21
any maintenance task on your snow thrower.
1.The scraper is located at the base of the snow thrower beneath the rotor housing.
2.Detach the worn scraper from the snow thrower by removing the 3 screws that hold it in place (fig. 11 A).
3.Install the new scraper and fasten it securely to the snow thrower with 3 screws.
STORAGE AND TRANSPORT
WARNING! For future reference, you should keep this operator’s manual.
•Thaw device before storing and allow it to dry completely.
•The machine should be stored carefully and safely in a dry environment when not used, far from the
reach of children, or in a place that is locked.
•Please do not take back and store the machine while it is still connected to the power source.
It may cause damage and injury.
TRANSPORT
•Secure the product to prevent slippage.
•Use the original packaging to ship whenever possible.
TROUBLESHOOTING
CAUTION Failures of your machine which require larger interference must always be eliminated by
specialized workshop. Unauthorized interferences can cause damages. If you can not rectify the fault
using the measures described here, contact an authorized service center.
FAULT/MALFUNCTION CAUSE REMEDY
Motor not running.
No mains voltage?
Check cable, plug, socket and fuse.
Cable faulty?
Contact authorized service center.
Device does not clear any snow.
Auger or discharge clogged?
See Rectify clogging
V-Belts loose or torn out?
Contact authorized service center.
Excessive vibration. Loose parts or damaged screws? Contact authorized service center.
CAUTION! Faults which can not be rectified with the aid of this table may be rectified by a
authorized service centre.
SERVICE AMD SPARE PARTS
•Have your machine serviced by a qualified repair personnel using only identical replacement
parts. This will ensure that the safety of the petrol tool is maintained.