17
disconnect the power cable. Any such operation should be performed after revolving part inside the machine
stops completely.
•The first time you use the machine or after replacing some parts, you should perform a test running and
ensure no abnormal conditions exist to avoid any potential damages or incidents.
•Do not move or transport the machine when the plug is connected into the power socket and
the switch is turned on.
•When using the machine, if you notice the machine running in an unstable state or hear abnormal sound
from the engine, please stop the machine and disconnect the power immediately and contact your original
distributor.
•If the appliance should start to vibrate abnormally, stop the motor and check immediately for the cause.
Vibration is generally a warning of trouble. Repair any damage before starting and operating.
• Keep the plug clear from water.
ELECTRICAL SAFETY
Caution! Do not touch the damaged cable and pull the mains plug when the cable is damaged while
working. Damaged cables increase the risk of an electric shock. If the power supply is damaged, it
must be immediately replaced with a cable without defect, to avoid dangerous situations.
•Do not expose this machine to the rain not even do not use this machine in dampness and wet. Keep
good lighting on the work place.
•Do not use the machine in place, where is the danger of fire or explosion.
•Protect yourself against the electric shock.
•Do not carry or manipulate the machine by service cabel, do not pull up the socket inlet from the socket
outlet by pulling the service cabel. Protect the service cable against heat, grease, aggressive liquids and
sharp edges.
•Pull up the socket inlet from the socket outlet before every adjustment, repair or maintenance. •Check the
service cabel regularly and check, if there are not marks of damage or ageing.
•If the service cabel is damaged, let it have changed in accredited service to prevent the danger.
•Do not connect the damaged service cabel into the supply and do not touch the damaged cable
before its disconnection of the supply. The damaged service cable could lead to the contact
with lively parts.
•Work only in such place, which you can reach safely. Allways keep stationary position and balance
•Avoid unintentional startup. When carrying the machine, always unplug the mains plug. When connecting
plugs to the socket, make sure the switch is turned off.
•Use only rubber-jacketed extension cords with sufficient wire gauge (see “Technical
specifications”).
•Check the damaged parts. Before the next using of the device it is necessary to replace the damaged
protection covers and other parts to judge, if the parts can continue to perform their duty.
•Check adjustment of moving parts and their moveability, concentrate on cracks and broken parts, fixation
and other circumstances, which could threaten their duty. Protection cover or another part, which is damaged,
must be repaired or changed by accredited service. Defective switch must be changed in accredited service.
•Do not use this machine if it is impossible to turn it on/of by the switch.
•Do not use this machine if the service cable is damaged or magged.
•This electric device is constructed in accordance with all valid safety regulations, which relate to it. All
repairs must be made only by qualified persons and and only original spare parts can be used. It can come
to serious danger for the user in another case.
•Disconnect the supply (by pullling out the plug from the socket for example):
Allways, when the machine is without supervision
Before eliminating of blocking
Before checking, cleaning or work on the machine
After crash into another subject
Allways, when the machine beginns vibrate unreasonably
When transporting
PERSONAL SAFETY
Содержание RD-ST02
