16
www.raider.bg
WARNING:
Failure to follow all Safety Rules and
Precautions can result in serious injury.
DANGER: THIS POWER TOOL CAN
BE DANGEROUS!
This unit can cause serious
injury including amputation or blindness to the operator
and others. The warnings and safety instructions in
this manual must be followed to provide reasonable
safety and efficiency in us ing this unit. The operator is
responsible for fol lowing the warnings and instructions
in this manual and on the unit. Never allow children to
use this tool,
KNOW YOUR UNIT
Read your instruction manual carefully until
you completely understand and can follow all
warnings and safety rules before operat ing the
unit.
Restrict unit to users who understand and
will follow all warnings and safety rules in this
manual and on the unit
PLAN AHEAD
WARNING:
Inspect area before start ing unit.
Remove alt debris and hard objects such as rocks,
glass, wire, etc. that can rico chet, be thrown, or
otherwise cause injury or damage during operation.
Always wear eye protection when operating, servicing,
or performing maintenance on unit. Wearing eye
protection will help to prevent brush or debris from
being thrown or ricochet ing into eyes and face which
can result in blindness and/or serious injury. Eye
protec tion should be marked Z87,
Wear hearing protection when using this unit,
Secure hair above shoulder length. Secure or remove
jewelry, loose clothing, or clothing with loosely hanging
straps, ties, tassels, etc. They can be caught in moving
parts,
« Stay alert. Do not operate unit when you are tired,
ill, upset, or if you are under the influence of alcohol,
drugs, or medication,
« Keep children, bystanders, and animals away from
work area a minimum of 30 feet (10 meters) when
starting or operating unit.
HANDLE FUEL WITH CAUTION
Eliminate all sources of sparks or flame (in cluding
smoking, open flames, or work that can cause sparks)
in the areas where fuel is mixed, poured, or stored,
Mix and pour fuel in an outdoor area; store fuel in
a cool, dry, well ventilated place; use an approved,
marked container for all fuel purposes,
« Do not smoke while handling fuel or while operating
the unit,
Do not fill fuel tank while engine is running.
Make sure the unit is properly assembled and in good
operating condition.
Avoid spilling fuel or oil. Wipe up fuel spills before
starting the engine.
Move at least 10 feet (3 meters) away from fuel and
fueling site before starting engine,
Always store gasoline in a container ap proved for
flammable liquids.
OPERATE YOUR UNIT SAFELY
DANGER:
RISK OF CUT; KEEP HANDS AWAY
FROM BLADE-Blade moves momentarily after the
trigger is re leased. Do not attempt to clear away cut
ma terial when the blade is in motion. Make sure the
switch is In the OFF position, the spark plug wire is
disconnected, and the blade has stopped moving
before removing jammed material from the cutting
blade. Do not grab or hold the unit by the cutting blade,
Inspect unit before each use for worn, loose, missing,
or damaged parts. Do not use until unit is in proper
working order.
Keep outside surfaces free from oil and fuel.
Never start or run engine inside a closed room or
building. Breathing exhaust fumes can kill.
Avoid dangerous environments. Do not use in not
ventilated areas or where explosive vapors or carbon
monoxide build up could be present.
Do not overreach or use from unstable sur faces such
as ladders, trees, steep slopes, rooftops, etc. Keep firm
footing and balance at all times.
Do not raise unit above your shoulders; the cutting
blade can come dangerously close to your body,
Always keep unit in front of your body. Keep all parts of
your body away from the cutting blade.
Keep the cutting blade and air vents free from debris.
Use only for jobs explained in this manual,
MAINTAIN YOUR UNIT PROPERLY
Have all maintenance other than the rec ommended
procedures described in the in struction manual
performed by an autho rized service dealer.
Disconnect spark plug before performing maintenance
except for carburetor adjust ments,
Do not use a cutting blade that is bent, warped,
cracked, broken, or damaged in any other way. Have
worn or damaged parts replaced by an authorized
service dealer,
Use only recommended Raider cut ting blades and
replacement parts; use of any other parts may void
your warranty and cause damage to your unit.
Empty fuel tank before storing the unit. Use up fuel left
in carburetor by starting engine and letting it run until
it stops.
Hand carry the unit with the engine stopped and
the muffler and cutting blade away from your body,
preferably with the blade cover installed.
Allow engine to cool, empty the fuel tank, and secure
the unit before storing or trans porting it in a vehicle.
Do not store the unit or fuel in a closed area where fuel
vapors can reach sparks or an open flame from hot
water heaters, electric motors or switches, furnaces,
etc.
Store unit so the cutting blade cannot acci dentally
cause injury.
Store unit with the blade cover installed.
« Store in a dry area out of reach of children.
SAFETY RULES
Содержание RD-GHT02
Страница 161: ...161 ...
Страница 162: ...162 www raider bg ...