1 4
1 5
www.raider.bg
near the edge of the panel.
•Do not use dull or damaged blades. Unsharpened or improperly set blades produce narrow kerf
causing excessive friction, blade binding and kickback.
• Blade depth and bevel adjusting locking levers must be tight and secure before making cut. If blade
adjustment shifts while cutting, it may cause binding and kickback.
•Use extra caution when sawing into existing walls or other blind areas. The protruding blade may cut
objects that can cause kickback.
CUTTING PROCEDURES:
• Danger: Keep hands away from cutting area and the blade. Keep your second hand on auxiliary
handle, or motor housing. If both hands are holding the saw, they cannot be cut by the blade.
• Do not reach underneath the work piece. The guard cannot protect you from the blade below the work
piece.
• Adjust the cutting depth to the thickness of the work piece. Less than a fool tooth of the blade teeth
should be visible below the work piece.
• Never hold piece being cut in your hands or across your leg. Secure the work piece to a stable
platform. It is important to support the work properly to minimize body exposure, blade binding, or loss of
control.
• Hold power tool by insulated gripping surfaces when performing an operation where the cutting tool
may contact hidden wiring or its own cord. Contact with a “live” and shock the operator.
• When ripping always use a rip fence or straight edge guide. This improves the accuracy of cut and
reduces the chance of blade binding.
• Always use blades with correct size and shape(diamond versus round) of arbor holes. Blades that do
not match the mounting hardware of the saw will run eccentrically, causing loss of control.
• Never use damaged or incorrect blade washers or bolt. The blade washers and bolt were specially
designed for your saw, for optimum performance and safety of operation.
MAINTENANCE
1. Unplug the power cord before cleaning the saw.
2. Clean the machine regularly, so ensure its longevity.
3. Lubricate with oil periodically rotating circular elements.
4. Periodically check the wear of carbon brushes for electric motors. Allowable wear should not be more
than 5-6 cm
5. When replacing the carbon brushes let the machine run for 10 minutes at idle. To change it is
necessary to develop a screwdriver caps on both sides of the hull.
6. Periodically inspect the power cord injuries. Upon finding such as contact company service out of
warranty.
SAFETY INSTRUCTIONS
Use of electrical saw is the tool in order
reduce the risk of fire, electric shock and injury, they must be subject to the following basic safety
precautions.
Read all these instructions BEFORE to launch this product. Keep these instructions:
1. Check the rating of, with companies indicated on the plate.
2. Keep the tool do the work area clean.
Clutter operate the site increases the risk of accidents;
3. Be aware to operate the site conditions
Do not leave the tool to rain. Do not use the tool in damp or wet environment. Work saw is good lighting.
Do not use the tool near flammable liquids or gases;
4. Protective hair against electric shock
Avoid contact with the body grounded surfaces (eg pipes, radiators, ovens, refrigerators);
5. Do not allow children away
Do not allow outsiders to contact tool or cord; Hold them off operate the place.
6. Keep unused tool in place
Keep the tool when not in use at the moment, locked in a dry, which can be accessed by children;
7. Do not overload the tool
He will do the tool do the work better and safer in the range indicated by the manufacturer;
8. Use the right tool
Do not try to force small tools or attachments to do the job of a great and powerful tool. Do not use tools
for specific activities (eg: Do not use a circular saw cuts on branches or trunks);
9. Work with correct operate the clothing
Do not wear loose clothing or jewelry, they can be caught in moving machine parts are. When grinding
outdoors is recommended to wear protective hair rubber gloves and shoes with stable tread. If you have
long hair, wear protective hair covering;
10. Use safety glasses
Furthermore, use breathing mask or if cuts is associated with release of suction;
11. Use dust collectors
If the equipment can be placed for extract and sabipane of suction, and assure their place ppavilno use;
12. Grounding-power cord.
Never Hold tool power cord, never pull cord to disconnect the power cord, cable and protective hair from
oil and heated to dopip objects and sharp edges;
13. Securing the workpiece
Use clamps or a vise to lock the workpiece, it is safer than if you are holding it by hand, but you can use
both hands on the saw for grinding tool;
14. Do not stretch to reach objects beyond your
the given tool may cause hazardous situation;
15. Giving the tool repaired only by a qualified person
This tool is towards the relevant rules of labor safety. Permitted repairs carried out only by a qualified
pepsonal using original spare parts, otherwise working for a significant risk of accident.
19. Preservation of the environment.
In view of environmental power, additional accessories and packaging must be subjected
to appropriate processing for reuse of the information contained in these materials.
Do not dispose of electric household waste! Under the EU Directive 2012/19/EC on waste
electrical and electronic devices and validation and as a national law power which can be
used more, must be collected separately and be subjected to appropriate processing for
recovery of contained they scrap.
