Raider R50ES-001, Руководство пользователя

Страница: 36 / 78

SECTION 2
Owner’s Manual Standard Operating Procedures
26
O
PERATIONAL
C
HECKS
Pull Start . Start the motor using the Recoil Starter.
Electric Start . Start the motor using the Electric Start Push Button.
Neutral Safety . Verify that the motor will not start in gear both forward and reverse.
Water discharge from check ports . When the motor is running verify that water is being
discharged from all check ports.
Tiller Steering . When moving the Tiller Arm, verify that the motor moves freely to port and
starboard.
Neutral . Verify the propeller does not engage when the gear selector is in the neutral position.
Forward . With the motor at idle, verify the Gear Selector moves freely into the forward position
and the propeller engages.
Reverse . With the motor at idle, verify the Gear Selector moves freely into the reverse position
and the propeller engages.
Throttle Control . With the engine in neutral, slowly increase the throttle RPM’s to
approximately.
Emergency Stop Switch . While the motor is running, remove the lock plate, the motor should
stop.
Engine Stop Swit ch. While the motor is running, press the Engine Stop Switch, the motor should
stop.
Shallow Water Running . Move the motor Reverse Lock Lever to the release position, lift the
lower unit past a 45° angle until the tilt stopper assembly locks.
Full Tilt Position . Move the motor Reverse Lock Lever to the release position, lift the Lower Unit
past a 90° angle until the tilt stopper assembly locks.