RAE PowerPak User’s Guide
24
8. Connect the Meshguard LEL to the battery.
9. Turn on the MeshGuard LEL.
13
Charging The RAE PowerPak
Before using the RAE PowerPak and whenever the RAE
PowerPak shows a low-power reading (10% or less), you should
charge it in a safe location.
1. If the RAE PowerPak is currently in service and is attached to a
MeshGuard, follow the instructions for removing it, on page
2. Remove the cap over the charging port on the bottom of the
RAE PowerPak by unscrewing it.
