RAE PowerPak User’s Guide
13
Er13:
The wrong type of battery has been placed in
one of the four slots. Replace it with the
correct type.
Er14:
The wrong type of charger is being used. The
correct RAE Systems charger (part number
F03-3014-000) identifies itself to the RAE
PowerPak.
Er15:
An internal fuse has been blown. Fuses on the
main circuit board cannot be replaced. The
main circuit board must be replaced. Contact
RAE Systems service.
The number of batteries is indicated by the number of segments
showing in the left side of the display.
These segments correspond to the battery locations (the enclosure
is shown with its front cover removed):
1
2
3
4
2
4
3
1
Note:
The percentage of battery
charge is relative to the capacity
of the entire number of
batteries. If there is one battery
and the reading is 75%, that
means 75% of the one battery’s
capacity. If there are multiple
batteries, 75% means 75% of
the total combined capacity.
Always refer to the number of
segments indicating the total
number of batteries.
