CORPORATE HEADQUARTERS
RAE Systems by Honeywell
3775 N. First St.
San Jose, CA 95134 USA
Phone: 408.952.8200 Fax: 408.952.8480
[email protected]
WORLDWIDE SALES OFFICES
USA/Canada: 1.877.723.2878
Europe: +45.86.52.51.55
Middle East: +00971.4.440.5949
China: +86.10.5885.8788-3000
Asia Pacific: +852.2669.0828
by Honeywell
Removing An instrument From The Cradle
To remove an instrument from the cradle, press the button to release the capture mechanism. Then lift the
instrument from its inlet end.
Charging An Instrument
’s Battery
The AutoRAE 2 Cradle automatically charges a docked instrument’s battery. The Charge Status LED glows red to
indicate that charging is taking place. When the instrument’s battery is fully charged, the LED glows green.
Active Carbon Filter For Removing VOC
Whether zeroing a ppbRAE 3000 or UltraRAE 3000 or in an environment in which the ambient air has VOC
(volatile organic compounds), it is highly recommended to use an Active Carbon Filter (P/N: 490-0006-000),
which filters out VOC from the air.
Note:
When an AutoRAE Controller is used with one or more Cradles, the air inlet on each attached cradle is
disabled and air is taken in through the Controller’s air inlet. Therefore, you only need to use one Active Carbon
Filter for the Controller instead of on each cradle.
To install the Active Carbon Filter on the cradle:
1.
Remove the standard filter (if one is installed).
2.
Remove the plastic filter adapter by twisting the plastic filter clockwise while gently pulling outward.
3.
Press the Active Carbon Filter into the receptacle. The filter is designed for 20 uses. To help you keep track of
how many calibrations are performed, there are 20 small boxes painted on the surface of the filter that you can
mark with a pen after each use.
Note:
Make sure the arrow on the side of the filter points toward the cradle.
Rev E May 2016
P/N T02-4014-000
MultiRAE
ToxiRAE Pro
QRAE 3
Handheld PID
Press Active Carbon
Filter into receptacle
Remove standard filter
Remove plastic
filter adapter
MicroRAE
