RAE-SAN DRAFT D, Руководство по установке

Страница: 9 / 20

Page:9
Headlight Modulation Function
The Headlight Modulation function allows for the rapid variation of the low beam headlight to increase the
likelihood of being seen by other road users.
It varies with country as to whether it is legal to be operated during the hours of darkness – but is generally
fine to be used during daylight hours.
The Headlight intensity is varied at the allowed rate of around 5Hz, and the amount of modulation can be
set. It is always a max intensity of 100% and the minimum can be set from 80 down to 0%. This is needed as
in particular some LED headlights will attempt to compensate and fight against the voltage modulation-
these generally need the modulation depth set to go down closer to zero.
If disabled in the configuration menu – the Headlight Modulation function will be inoperative.
Function Normal Mode 4 Button Mode
Toggle Headlight Modulation ON / Off Set To Low Beam and Switch to High
for Press > 0.1s < 0.5s
( ie quick flick to high beam and back) Medium or Long Press of Left Up – see
4 Button Mode table