RAE-SAN DRAFT D, Руководство по установке

Страница: 12 / 20

Page:12
Value
Function / affects / explanation Normal
polarity
setting Diagram
Custom 4 button
mode
setting
4 BUTTON CONTROL MODE 0 => Normal all input mode
1..4 => use 4 Button map 1..4 0 0 1..4
HIGH Beam Input POL Hi TRUE => Active on = +12V
FALSE=> Active on = 0V TRUE FALSE FALSE
HIGH Beam Input STATE TRUE => On while Held
FALSE=> Press is Latched TRUE TRUE FALSE
STARTER Input POL Hi TRUE => Active on = +12V
FALSE=> Active on = 0V TRUE FALSE FALSE
STARTER Input STATE TRUE => On while Held
FALSE=> Press is Latched TRUE TRUE FALSE
LEFT Ind Input POL Hi TRUE => Active on = +12V
FALSE=> Active on = 0V TRUE FALSE TRUE
LEFT Ind Input STATE TRUE => On while Held
FALSE=> Press is Latched TRUE TRUE TRUE
RIGHT Ind Input POL Hi TRUE => Active on = +12V
FALSE=> Active on = 0V TRUE FALSE TRUE
RIGHT Ind Input STATE TRUE => On while Held
FALSE=> Press is Latched TRUE TRUE TRUE
HORN Input POL Hi TRUE => Active on = +12V
FALSE=> Active on = 0V TRUE FALSE FALSE
HORN Input STATE TRUE => On while Held
FALSE=> Press is Latched TRUE TRUE FALSE
KILL Input POL Hi TRUE => Active on = +12V
FALSE=> Active on = 0V FALSE FALSE FALSE
KILL Input STATE TRUE => On while Held
FALSE=> Press is Latched TRUE TRUE FALSE
BRAKE Input POL Hi TRUE => Active on = +12V
FALSE=> Active on = 0V TRUE FALSE TRUE
BRAKE Input STATE TRUE => On while Held
FALSE=> Press is Latched TRUE TRUE TRUE
LIGHTS Input POL Hi TRUE => Active on = +12V
FALSE=> Active on = 0V TRUE FALSE TRUE
LIGHTS Input STATE TRUE => On while Held
FALSE=> Press is Latched TRUE TRUE TRUE
GATE Input POL Hi TRUE => Active on = +12V
FALSE=> Active on = 0V FALSE FALSE FALSE
GATE Input STATE TRUE => On while Held
FALSE=> Press is Latched TRUE TRUE TRUE
LIGHTS Off When Crank Turn Headlights off while cranking TRUE TRUE TRUE
LOW Beam Active with High Leave Low Beam On when High On FALSE FALSE FALSE
LIGHTS On With Power On Turn Low and Tail on when powered –
ignore Lights input TRUE TRUE TRUE
MODULATE Low Beam Enable the Modulation Function TRUE TRUE TRUE
MODULATION Depth %
(30=100) Set how Dim the Modulation goes 50 50 50
STARTER Inhibited TRUE => starter can be inhibited by kill or
gate – TRUE TRUE TRUE