MNC-0500-002
26 of 36
Revision H
Amplifier Communication and Protocol, Octagon ISA CPU
Amplifier Commands
AC Power
Command Byte
: '!'
Function
: Enables/Disables AC power to the HPA.
Parameters
:
'0' - Disable AC power.
'1' - Enable AC power.
Compatibility
: This command is only available for ODUs connected to a controller.
The controller will intercept the command and enable or disable power to the specified
amplifier.
Heater Standby
Command Byte
: ':'
Function
: Enables/Disables Heater Standby mode.
Parameters
:
'0' - Disable Heater Standby.
'1' - Enable Heater Standby.
High Voltage On
Command Byte
: '@'
Function
: Turns high voltage on. If the unit is in Filament Time Delay, high voltage will
automatically turn on when Filament Time Delay ends.
High Voltage Off
Command Byte
: 'A'
Function
: Turns off high voltage. If the unit is in Filament Time Delay, this command
ensures that high voltage will not turn on when Filament Time Delay ends.
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
