Radyne RCS11, Инструкция по установке и эксплуатации

Страница: 38 / 60

Installation RCS11 1:1 Redundancy Switch
Page 2-24 TM061 Rev. 1.3
27 CS-B Clear to Send B (+) Output
11 DM-A Data Mode A (-) Output
29 DM-B Data Mode B (+) Output
13 RR-A Receiver Ready A (-) Output
31 RR-B Receiver Ready B (+) Output
15 BAL EXC-
A External Clock A (-) Input
33 BAL EXC-
B External Clock B (+) Input
16 RX-0-A Receive Octet A (-) Output
34 RX-0 B Receive Octet B (+) Output
17 TT-A Terminal Timing A (-) Input
35 TT-B Terminal Timing B (+) Input
1, 19, 20, 37 GND Signal Ground
J7 - G.703 (BALANCED)
Table 2-31 below lists the pinouts and signal definitions for the G.703 (Balanced) 15-pin
connector.
Table 2-32.
J20 - G.703 (Balanced) 15-Pin Female ‘D’ Connector
Pin No. Signal Name Signal Direction
1 Send Data (-) SD-A Input
2 Ground GND -----
9 Send Data (+) SD-B Input
7 External Clock A (-) BAL EXC-A Input
8 External Clock B (+) BAL EXC-B Input
3 Receive Data A (-) RD-A Output
4 Ground GND -----
11 Receive Data B (+) RD-B Output
12 Drop Data Out (-) DDO-A Output
5 Drop Data Out (+) DDO-B Output
13 Insert Data In (-) EXC (-) IDI-A Input
6 Insert Data In (+) EXC (+) IDI-B Input