RADWAG WLY/KTP Series, Руководство пользователя

Страница: 75 / 176

23.5.4. Automatic triggering of cumulative labels
Users have access to the function of automatic triggering of printing
cumulative labels after setting parameters
< Mode>
and
< Threshold>
.
Procedure:
•
Enter
< Working modes>
parameter group as described
in chapter 23 of the manual,
•
Enter the required working mode and choose:
„ Labelling mode /
C label automatic triggering / Mode”
and then set the
required option:
None
- Cumulative label printout is initiated by pressing
or
*
,
Mass
- Cumulative label printout is initiated by exceeding the
value set in parameter
< Threshold>
. The value
is treated as the total from single weighings,
Number
- Cumulative label printout is initiated by exceeding the
value set in parameter
< Threshold>
. The value
is treated as the number of single weighings.
*)
Manual printing of cumulative labels can be done in two ways
depending on the button used:
Printing followed by zeroing label counter or the total mass
Printing without zeroing label counter or the total mass
By default setting button is accessible in the bottom part of the
display but activating the button can be done in subm
„
enu:
Parameters / Display / Actions”
(see ch. 17.2 of the manual).
75