RADWAG WLY/KTP Series, Руководство пользователя

Страница: 38 / 176

15.1. RS 232 settings
Procedure:
•
Enter
< Communication>
according to ch.15 of the manual, select
< COM1>
or
< COM2>
, and then set an appropriate value.
For RS 232 following parameters are accessible:
•
Baud Rate - 4800, 9600, 19200, 38400, 57600, 115200 bit/s
•
Data bits - 5, 6, 7, 8
•
Stop Bit - No, 1, 1.5, 2
•
Parity - No – Odd – Even – Mark – Space
15.2. ETHERNET setting
Procedure:
•
Enter
< Communication>
according to ch.15 of the manual,
select
< Ethernet>
and then set an appropriate value.
Following settings are accessible for Ethernet:
•
DHCP - Yes – No
•
IP Address - 192.168.0.2
•
Subnet Mask - 255.255.255.0
•
Default gateway - 192.168.0.1
Notice:
The settings above are only for information purposes. Transmission
parameters should be matched to the local client network.
•
After making changes press , then a new message is displayed:
<Restart to apply the changes>
,
•
Go back to weighing saving parameters and restart the device.
38