RADWAG PUE H315, Руководство пользователя

Страница: 14 / 28

14
8. FACTORY SETUP
To access and modify both factory settings and parameters that are made
available for a user, run Factory Setup mode. Running Factory Setup mode
enables the technician to define the balance.
8.1. Access

Switch the weighing device off, to do it press key.

Press and hold S1 switch located on the electronics board, while holding
the S1 switch, press key to run the weighing device.
Access to factory setup switch

Wait as long as the scale restart is in progress.

Press and key combination, message <P0.FAct> is displayed.

Press key to go to factory parameters' submenu no. 1.
After completed factory parameters setup, restart the
weighing device.