11
5.2. Start-Up
The indicator can be connected to the mains only with a power supply that
comes standard with the particular model. Nominal voltage of the power supply
(specified on the power supply data plate) has to be compatible with the mains
nominal voltage.
Procedure:
Connect the power supply to the mains. Plug it to the power supply socket
that is located on the scale's side.
Press
key, it is to be found at the top of the operation panel.
Upon completed start-up, the home screen is displayed automatically.
5.3. Battery Status
Optional scale design features an internal battery.
pictogram, displayed
at the top of the screen, either signals battery status or informs that battery
charging is in progress:
pictogram displayed in a cyclic manner: battery charging.
pictogram displayed continuously: battery charged within 75% -
100% range of permissible voltage,
pictogram displayed continuously: battery charged within 50% - 75%
range of permissible voltage,
pictogram displayed continuously: battery charged within 25% - 50%
range of permissible voltage,
pictogram displayed continuously: battery discharged (charge level
below 25% of the permissible voltage), connect the scale to the mains in
order to charge it,
blinking
pictogram: damaged battery or battery lack,
no
pictogram: scale not equipped with the battery.
Battery discharge is signalled by the following message:
<Excessively discharged battery. Scale shutdown is to
occur>. Upon scale shutdown, connect it to the mains in
order to charge the battery.
