29
Enter global parameters submenu of the PUE 7.1 indicator.
Go to
<Weighing module type>
parameter and select the required
weighing module number.
Select the associated device from the list. Message
<Restart to
implement changes>
is displayed.
Press
button to confirm and return to weighing, saving changes,
next restart the device.
Enter factory parameters submenu of the PUE 7.1 indicator.
Go to a modified submenu of the weighing platform, list of the following
parameters is displayed:
NAME
DEFAULT
VALUES
DESCRIPTION
Port *
None
None,
RS232 (1),
RS232 (2)
Declaring number of RS232 port of PUE 7.1
indicator
for
communication
with
the
associated device.
IP Address
0.0.0.0
-
Declaring IP address of PUE 7.1 indicator for
communication with the associated device.
IP port
0
-
Declaring IP port of PUE 7.1 indicator
for communication with the associated device
via Ethernet (by default:
4001
).
Reading unit:
range 1
0.001
0.001
50
Rounding of the last digit and position
of a decimal point for weighing range I of
the associated device.
Reading unit:
range 2
0.001
0.001
50
Rounding of the last digit and position
of a decimal point for weighing range II of
the associated device.
Reading unit:
range 3
0.001
0.001
50
Rounding of the last digit and position
of a decimal point for weighing range III
of the associated device.
Range
0
-
Weighing range of the associated device.
Range 2
0
-
Switching point of weighing range II of
the associated device.
Range 3
0
-
Switching point of weighing range III of
the associated device.
Adjustment
unit
G
g, kg, lb
Adjustment unit of the associated device.
Refresh *
-
-
Automatic readout of metrology parameters
from the associated device.
*)
- Transmission parameters of PUE 7.1 indicator must be compatible with the associated device.
To set transmission parameters of PUE 7.1 go to
„SETUP/ Communication”
submenu.
Set respective parameter values and return to weighing, saving changes.
