18
9.1.2. Colours of Weighing Platform's Signal Wires
Markings
RADWAG
Colour
Marking of terminals (solder pads) on RADWAG
A/D converter boards
+INPUT
brown
+5V
-INPUT
green
AGND
+OUTPUT
yellow
+IN
- OUTPUT
white
-IN
SENSE
grey
+REF
- SENSE
pink
- REF
SHIELD
yellow green
by shield connection guidelines
Figure 18. Additional A/D converter module
– DP6
10. FACTORY SETUP
To access and modify factory settings, and parameters that are made available
for a user, run Factory Setup mode. Running Factory Setup mode enables the
technician (user) to define the scale.
10.1. Factory Setup Access
Press
switch to power the indicator, wait for the operating system
to be loaded.
Upon completed start-up, the home screen is displayed automatically.
Through special opening, Phi 3.2 mm, located in the bottom part of the
indicator, press
S1
internal switch, do it using a rigid tool (screw driver,
hex key, etc.)
