RADWAG KB series, Руководство пользователя

Страница: 98 / 128

98
T_A CR LF
T_D CR LF - command accepted and in progress
- command completed
T_A CR LF
T_v CR LF - command accepted and in progress
- command comprehended but tare range overflow appeared
T_A CR LF
T_E CR LF - command accepted and in progress
- time limit for stable result exceeded
T_I CR LF - command comprehended but cannot be executed
28.4.3. Get tare value
Syntax: OT CR LF
Reply: OT_TARA CR LF – command executed
Frame format:
1 2 3 4-12 13 14 15 16 17 18 19
O T space tare space unit space CR LF
Tare - 9 characters justified to the right
Unit
- 3 characters justified to the left
Notice:
Tare values are always send in calibration unit.
28.4.4. Set tare value
Syntax: UT_TARE CR LF, where TARE – tare value
Possible replies:
UT_OK CR LF - command completed
UT_I CR LF - command correct, but not accessible at the moment
ES CR LF - command incorrect (e.g. incorrect tare format)
Notice:
Use dots as decimal points in tare values.