RADWAG KB series, Руководство пользователя

Страница: 54 / 128

18.2. Configuration of outputs
Ascribing a function to the output enables the output at the same time.
If an output has no ascribed function it is disabled.
Procedure:
•
Enter < Inputs / Outputs> according to ch. 18 of this manual,
•
Choose < Outputs> and enter the required output, then you
will see the list of functions:
None Output disabled
Stabile Stable weighing result over LO threshold value
MIN stable Stable weighing result below the MIN threshold
MIN non-stable Non-stable weighing result below the MIN threshold
OK stable
Stable weighing result between MIN and MAX
thresholds
OK non-stable
Non-stable weighing result between MIN and MAX
thresholds
MAX stable Stable weighing result over the MAX threshold
MAX non-stable Non-stable weighing result over the MAX threshold
Confirmation of
cycle completion * Signal that confirms that a cycle of dosing has been
completed (the defined amount)
*) Not applicable to „Comparator” software.
•
Choose the required function from the list and return to weighing saving
the changes according to ch. 12.2 of this manual.
Notice:
By default all outputs have no function attributed – setting <None>.
54