RADWAG CY10, Руководство по эксплуатации

Страница: 7 / 18

7
To clean polished surfaces, make circular movements. After removing all dirt,
polish the surface with a dry cloth to dry the surfcae and make it glow.
4. SERVICE AND REPAIRS
If you can notice any damage, unplug the device
immediately. Damaged element must be immediately
replaced or repaired by RADWAG service technicians.
If the scale malfunctions, contact the manufacturer’s local service center.
In case of any defect, the operator must supply the defective device to the
manufacturer’s service center or, if impossible, report the defect to the service
center to arrange the scope and method of repair.
The operator is not allowed to repair the product in any way.
Any unauthorized manipulations (modifications, repairs,
etc.)
shall invalidate certificates, declarations and
guarantees of the manufacturer.
5. DISPOSAL
Scales must be recycled and are not considered as household waste.
The product must be disposed of when its life ends in accordance with
applicable law.
6. STRUCTURE
CY10 are single-sensor scales intended to quickly and precisely measure
masses up to 300 kg. In single-sensor scales, mass is measured by one mass
sensor located in the structure of the platform.
Platforms are equipped with a stainless steel weighing pan and, depending on
the scale type, star-piece structure and foundation that is made of stainless
steel or painted.