Rado Anatom 10.366.76.1, Инструкция по эксплуатации

Страница: 34 / 36

31
Make sure the chronograph hands are
at zero (Pusher B).
Pusher A: Start – stop, start – stop etc.
Pusher B: Reset (after a stop).
Self Winding Split-SecondS
cHronograpH
fig ix
caliber: 663
ScreW-in croWn
This model is fitted with a screw-in crown.
The crown must be unscrewed before using
it to adjust any settings. It must then
be returned to position 1 and screwed back
in. Position 1 is the starting point for all
manipulations of the crown.
tHe croWn HaS 3 poSitionS
Only positions 1 and 3 are functional.
normal position
position 1
When pressed up against the case
and screwed in, the crown ensures that
the watch is water-resistant.
to set the time
position 3
Pull the crown out to position 3. The small
seconds hand will stop. Set the correct time
by turning the crown forward or backward.
Synchronize the seconds by pushing
the crown back to position 1 to coincide
with a given time signal.
chronograph functions
Timing to within 1/8th of a second for
up to 12 hours.
Make sure the chronograph hands are
at zero (Pusher B).
Pusher A: Start – stop, start – stop etc.
Pusher B: Reset (after a stop).