Rado Anatom 10.366.76.1, Инструкция по эксплуатации

Страница: 33 / 36

30
to set the date
position 2
Pull the crown out to position 2 and rotate
it counterclockwise to the desired date, then
push the crown back to position 1.
Note: Date setting is not recommended
between 8 pm and 2 am.
to set the time
position 3
Pull the crown out to position 3. The small
seconds hand will stop. Set the correct time
by turning the crown forward or backward.
Synchronize the seconds by pushing
the crown back to position 1 to coincide
with a given time signal.
chronograph functions
Timing to within 1/8th of a second for
up to 12 hours.
to set the time
position 3
Pull the crown out to position 3 and turn it
forwards or backwards to the desired time.
Synchronize seconds by pushing the crown
back to position 1 to coincide with a given
time signal.
Self-Winding cHronograpH
WitH date
fig viii
caliber: 650
tHe croWn HaS 3 poSitionS
normal position
position 1
When pressed up against the case
(position 1), the crown ensures that the
watch is water-resistant (if not damaged).