Rado Anatom 10.366.76.1, Инструкция по эксплуатации

Страница: 29 / 36

26
6. t2: additional time zone adjustment.
Select function 6.
Pull crown out to position 2.
To adjust by hours: Turn the crown quickly.
To adjust by 1/2 hours: Turn the crown
slowly.
Push the crown back to position 1.
Note: Caliber 196 only permits 1-hour
adjustments.
to select 24-hour display or Am/pm display.
The watch can display the time in 12-hour
(AM/PM) or 24-hour mode.
Select Function 6. To check the display
mode, briefly press the crown once: if A or P
appears, the time display is in 12-hour
mode. If no letter appears, the time display
is in 24-hour mode. To change mode, press
crown briefly a second time.
7. tm: timer
Select function 7.
to set countdown start time
Pull crown out to position 2.
a) Hours: Turn crown quickly.
b) Minutes: Turn crown slowly.
to start countdown
Push the crown back to position 1.
When the countdown reaches zero,
the watch emits an audible signal. To switch
the signal off, press crown briefly.