Rado Anatom 10.366.76.1, Инструкция по эксплуатации

Страница: 25 / 36

22
hour. The minutes and seconds remain the
same. Push the crown back to position 1.
to set the time
position 3
Pull the crown out to position 3. The small
seconds hand will stop. Set the correct time
by turning the crown forwards or backwards.
Synchronize the seconds by pushing
the crown back to position 1 to coincide
with a given time signal.
chronograph functions
Timing to within 1/10th of a second for up to
12 hours.
Addition function
Pusher A: Start
Pusher A: Stop to read time
Pusher A: Restart
Pusher A: Stop
At the end of the last step, the chronograph
indicates the total time.
Pusher B: Reset
Split time function
Pusher A: Start
Pusher B: Stop to read the split time.
The chronograph continues to operate.
Pusher B: Restart
The chronograph hands catch up with
the elapsed time.
Pusher A: For the last stop and to display
the total time.
Pusher B: Reset
Readjusting the chronograph hands
After a battery change it may be necessary
to reset the hands to their original position.
Initialization of the 12-hour totalizer hand:
Pusher A and crown in position 2
Initialization of the 60-minute totalizer hand:
Pusher B and crown in position 2