RadiSys EPC-26A/27, Руководство пользователя

Страница: 1 / 86

Page 1
1 1
1. Product Description
The EPC-26A/27 PC/AT-compatible CPU module is an EMC form factor EPC
based on the DX2 and DX4 Intel486 processor. The EPC-26A uses the 50
MHz Intel486 DX2 CPU, while the EPC-27 uses the 100 MHz IntelDX4.
The EPC-26A/27 uses the Pico-Power Redwood chip set, a two-chip set
packaged in a 176-pin TQFP.
This EPC meets stringent safety and low EMI standards (UL-1950). All front
panel accessible ports have filter networks for reduced EMI and increased
ESD protection.
The EPC-26A/27 processor modules contain the following features:
•
The EPC-26A contains an Intel DX2 Enhanced processor (208-pin
SQFP package, 3.3V). The EPC-27 is an Intel DX4 processor.
•
One 72-pin 3.3V SIMM socket for memory sizes of 4, 8, 16 or 32 MB
•
PC/AT compatible keyboard interface, reset switch and run LED
•
Standard PC-compatible peripherals
•
Time-of-day clock with 256 bytes of battery-backed CMOS RAM and
user-replaceable battery
•
One RS-232 9-pin DTE serial port (COM1) and one RJ45 serial port
(COM2)
•
Flashable Phoenix BIOS
•
EXM expansion interface
•
Optional 2 or 4 MB Flash memory and 128 KB SRAM and watchdog
timer
If your EPC-26A/27 contains the optional Flash/SRAM configuration, you will
also receive a File/Utilities diskette containing formatting software and SRAM
drivers. The software is explained in detail in the
XFORMAT Software User’s
Manual that accompanies the diskette.