Radionics READYKEY K1100 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 75

background image

Printer Reports

_______________________________

K2100/K1100 User Guide

_______________________________

74-07069-000-B 3/94

Page 41

© 1994 Radionics, Inc.

Header - The HE Command

Two features are provided, the Header text that appears at the top of each page, and
whether or not a new page is started and a header printed at the end of each page of on-
line transactions.

Header Text

The text that appears at the top of every report can be changed to reflect the site name or
any other suitable text. Up to 30 characters can be entered, which are split into 3 'strings'
of 10 characters each.

Header used in On-line Transactions

When on-line transactions are printed they will normally print continuously without
interruption. You can, however, set the transactions to leave a gap at the end of each page
and print the header at the top of the next page.

Present an editor key to the front panel reader.
Enter the password and press ENT, if required.

You will now see the

prompt.

Type HE and press ENT.

Header Text 1

Type the first 10 characters of the header text. Press ENT.

Press

NXT

to go to the second 10 characters.

Header Text 2

Type the second 10 characters of the header text. Press
ENT.

Press

NXT

to go to the final 10 characters.

Header Text 3

Type the final 10 characters of the header text. Press ENT.

Press

NXT

to go to the next field.

Enable Header in On-line Transactions

Press Y for on-line transactions to start a new page and
print the Header. Press ENT.

Press N for continuous transaction printing, without break.
Press ENT.

Press ESC to go back to

prompt.

Kill Transactions - The K Command

The K2100/K1100 door controller can store up to 2500 transactions. How long a time this
represents depends, of course, on the amount of activity in the system. For instance if
there are 100 transactions a day (that is ALL events that are printed) then the memory
represents about 25 days activity.

On occasion it might be necessary to clear this memory. Such an occasion will be where a
printer is connected for the first time, after the system has been in use for some time.
Unless the memory was cleared, all 2500 transactions will be automatically printed,
requiring about 50 pages of printer paper.

«
...
43
44
45
46
47
...
»

Содержание READYKEY K1100












































































Отзывы:

Нет отзывов

Похожие инструкции для READYKEY K1100

Бренд: D-MAX Страницы: 33

MagnaLatch ALERT

Бренд: D&D Technologies Страницы: 2

Бренд: Nady Systems Страницы: 8

Бренд: Rafiki Protection Страницы: 32

Бренд: Ultra Products Страницы: 1

Бренд: Onkyo Страницы: 10

Feeder/Deliming System EV9797-20

Бренд: Everpure Страницы: 2

Бренд: Linear Страницы: 39

Бренд: The Singing Machine Страницы: 56

Бренд: DAITEM Страницы: 19

Бренд: Eurotops Страницы: 12

Бренд: Telwin Страницы: 88

Бренд: ACTi Страницы: 19

Бренд: Altec Lansing Страницы: 2

Бренд: D-MAX Страницы: 8

DS-75D16 Swingarc

Бренд: Miller Electric Страницы: 48

MM2040 TOUCHBOX

Бренд: Manta Страницы: 16

Бренд: Velleman Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды