Radionics READYKEY K1100 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 75

background image

Controlling Access

_______________________________

K2100/K1100 User Guide

_______________________________

© 1994 Radionics, Inc.

Page 24

74-07069-000-B 3/94

Using the AC Command

To set Access Codes use the AC Command. At this point you should know what Access
Levels are set and what Time Profiles, if any, you are going to use.

Present an editor key to the front panel reader.
Enter the password and press ENT, if required.

You will now see the

prompt.

Type AC and press ENT.

What you see displayed is the Primary Access Level for
Access Code 1.

Use the up and down arrow keys or FastFind (

•

) to select

the Access Code you want to change.

Primary Access Level

Once you have selected the Access Code you want to use,
type the Primary Access Level (0-128) and press ENT.

Press

NXT

to go to the next field.

Primary Time Profile

Enter the Time Profile you want to apply to the Primary
Access Level. If you want no time restriction then enter zero.
Press ENT.

Press

NXT

to go to the next field.

Secondary Access Level

Type the Secondary Access Level (0-128) and press ENT.

Press

NXT

to go to the next field.

Secondary Time Profile

Enter the Time Profile you want to apply to the Secondary
Access Level. If you want no time restriction then enter zero.
Press ENT.

Press ESC to return to the

prompt.

Holidays - The HP Command and HR Command

The K2100/K1100 allows the setting up of 24 different Holiday Profiles. Each Holiday
Profile consists of up to 20 Holiday Periods, a Holiday Period being a start date and
duration. Up to 254 Holiday Periods can be defined.

Once a Holiday Period been defined it can be applied to any keyholder using the E
command. When a Holiday Profile is active then any keyholder assigned the Profile will not
gain access and a

event will be recorded.

System Holidays

Holiday Profile 1 is a special case. It contains all the Holiday Periods that can be used to
override Time Profiles (see

Time Profiles

below for full details). This means that, for

instance a door that automatically opens during office hours, Monday to Friday, will

not

open on holidays that may fall during the week, such as public holidays, Christmas Day.
Likewise, a person allowed into a building during the week can be prevented from gaining
access on such days.

For this reason you should refrain from using Holiday Profile 1 for keyholder use, and
reserve it for System Holiday use only.

«
...
26
27
28
29
30
...
»

Содержание READYKEY K1100












































































Отзывы:

Нет отзывов

Похожие инструкции для READYKEY K1100

Бренд: Samsung Страницы: 40

D2xC2LD2 Series

Бренд: E2S Страницы: 13

Бренд: E2S Страницы: 14

Бренд: Eagle Copters Страницы: 11

Бренд: FältCom Страницы: 40

Бренд: RBH Sound Страницы: 12

Бренд: Parkside Страницы: 113

Бренд: QOLSYS Страницы: 3

Бренд: ADEMCO Страницы: 56

Бренд: J.W. Davis Страницы: 2

Бренд: INIM Страницы: 4

STAR-LIGHT Universal HD over Coax DWC-D3263TIR

Бренд: Digital Watchdog Страницы: 36

Бренд: unii Страницы: 2

Бренд: D-MAX Страницы: 8

LoRa Custos WWDLW Series

Бренд: UbiTech Страницы: 17

Бренд: 3xLogic Страницы: 17

Бренд: Macurco Страницы: 32

Бренд: Behringer Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды