© 2015 Radiodetection Ltd
3
Disposal
This symbol on the product, accessories or
literature indicates that the product and its
electronic accessories (e.g. charger, headset,
USB cable) must not be treated as domestic
waste, but must be disposed of professionally.
It is your responsibility to dispose of your waste
equipment by handing it over to a designated collection
point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your
waste equipment at the time of disposal will help to
conserve natural resources and ensure that it is recycled
in a manner that protects human health and the
environment. For more information about where you can
drop off your waste equipment for recycling, please
contact your local city office, your disposal service or
product supplier.
Please dispose of this device in a manner appropriate to
the relevant legal requirements at the end of its product
life
Batteries should be disposed of in accordance with your
compan
y’s work practice, and / or the relevant laws or
guidelines in your country or municipality.
Special Bluetooth
®
notice
RD8100 locators and transmitters contain a Class 1
Bluetooth device that can emit radio frequency energy
during the operation of certain product features. While
the Bluetooth device is busy, pairing or sending iLO
C™
commands from the locator to the transmitter, or sending
SurveyCERT
™+ data, always ensure a minimum
separation of 200mm (8 inches) between the Bluetooth
antenna and your body. The location of the antenna is
shown in Section 3, figure 3.1.
Wireless technology compliance
Use of iLOC wireless technology where applicable may
be subject to national telecommunication regulations.
Check with your local government authorities for further
information.
1.2 Compliance
EU Compliance
This equipment complies with the following EU
Directives:
R&TTE Directive 1999/5/EC
Low Voltage Directive: 2006/95/EC
EMC Directive: 2004/108/EC
FCC Compliance Statement
This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
The equipment may not cause harmful
interference.
The equipment must accept any interference
received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply
with the limits for a Class A digital device pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the manufacturer’s instruction manual,
may
cause
harmful
interference
with
radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in
which case you will be required to correct the
interference at your own expense.
Modifications
: Any modifications made to this
equipment not approved by Radiodetection may void the
authority granted to the user by the FCC to operate this
equipment.
Industry Canada Compliance Statements
ICES-003 Class A Notice:
This Class A digital apparatus complies with Canadian
ICES-003.
Avis NMB-003, Classe A:
Cet appareil numérique de la classe A est conforme à la
norme NMB-003 du Canada
1.3 Intellectual property
© 2015 Radiodetection Ltd. All rights reserved.
Radiodetection is a subsidiary of SPX Corporation. SPX,
the green “>” and “X” are trademarks of SPX
Corporation, Inc. Radiodetection and RD8100 are
registered trademarks of Radiodetection in the United
States and/or other countries.
Trademarks and Notices. The following are trademarks
of Radiodetection: eCert, iLOC, TruDepth, SideStep,
SideStep
auto
, RD Manager, Peak+, SurveyCERT,
StrikeAlert, CALSafe, Current Direction. The design of
the RD8100 locators and transmitters has been
registered. The design of the 4 chevrons has been
registered.
The Bluetooth word, mark and logos are registered
trademarks of Bluetooth Sig, Inc. and any use of such
trademarks by Radiodetection is under license.
Windows and Windows XP are either registered
trademarks or trademarks of Microsoft Corporation in the
United States and / or other countries.
Due to a policy of continued development, we reserve
the right to alter or amend any published specification
without notice. This document may not be copied,
reproduced, transmitted, modified or used, in whole or in
part, without the prior written consent of Radiodetection
Ltd
