Radiocrafts
Embedded Wireless Solutions
RCxxxxHP-DK
2020 Radiocrafts AS
RCxxxxHP-DK User Manual (rev. 3.04)
Page 3 of 13
Development Kit Introduction
The Development Kit (DK) is designed to make it easy for the user to evaluate the onboard
module, develop an application and build prototypes very quickly. The kit includes either two
Development Boards (DB) or three DBs (for TinyMesh kits). The Development board contains
the selected module with its dedicated article number and embedded protocol and associated
support circuits. The board can easily be operated using a PC terminal emulator or the
RCTools PC suite from Radiocrafts.
Your Development Kit should contain the following items:
Kit contents
Item
Number of articles
Development Board w/high power radio module
2
Antenna, 50
quarter-wave monopole, SMA male connector
2
SMA to BNC adapters
2
USB Cable
2
AC/DC battery eliminator 6VDC
2
For TinyMesh
TM
Development Kits the number of articles is 3 of each item.
There are two different assemblies of the Development Board referenced in the rest of this
document depending on the article number on the onboard RF module as summarized in the
table below:
Development
Boards
RC11xxHP-DB
RC12xxHP-DB
RC17xxHP-DB
RC16xxHP-DB
Supported
Modules
RC11x0HP-RC232
RC11x0HP-TM
RC12x0HP-RC232 RC17xxHP-
MBUS4
RC17xxMP-
MBUS4
RC17xxHP-
WIZE
RC1692HP-SIG
This User Manual describes how to use the Development Kit and provides detailed
documentation for the Development Board.
The Development Kit includes what you need to evaluate the RF performance of the modules,
develop your own application interfacing the modules, and can also be used to build a
prototype of your application.
