RT-CRC1 User’s Guide
Copyright © 2010, Radio-Tone. All Right Reserved.
4
ORANGE COLOR LIGHTS UP : The build-in battery is being charging.
GREEN COLOR LIGHTS UP
: The build-in battery is charged up and the RT-CRC1
is working on external power supply.
6. [ DC 12V ] Terminal
This terminal is used to connect an external DC 12V power supply
Installation
Charging the built-in battery
Connect the AC adapter to the [ DC 12V ] Terminal of the
RT-CRC1.
Plug the AC adapter to an AC outlet.
Normal operation with build-in battery
This picture just shows the connection of Receiver, Repeater Controller and Transmitter. For real repeater
system, the antennas of both receiver and transmitter maybe extended and installed for approximate 10
meters, or use a DUPLEXER to combine the RF signal of receiver and transmitter. These are the ways to
provide adequate rejection of strong transmitter signal occurring at the receiving signal.
Turns off the RT-CRC1 and all radio units.
Connect the radio units to the RX/TX Terminals of the RT-CRC1 by using correct cable.
