RT-CRC1 User’s Guide
Copyright © 2010, Radio-Tone. All Right Reserved.
1
Thank You Notice
Thank you for purchasing RT-CRC1 Crossband Duplex Repeater Controller. Please read this User’s Guide carefully
before putting RT-CRC1 into operation. Support for the RT-CRC1 is available by email. Please direct all questions
via email to [email protected]. Your question(s) will be answered promptly.
Safety Information
Electrical shock hazard
Never attempt to connect the unit to any power network other than one for which it was intended.
Do not open the housing of the units.
Switch OFF the unit, and then disconnect the unit from the external power supply and from all other devices if a
fault occurs.
Install the unit only in a dry place protected against the elements.
If you are uncertain about the safe operation of the unit, shut it down immediately and secure it to prevent any
unauthorized start-up. Safe operation is no longer possible, for example,
-
if damage is visible to the unit or the cables,
-
if the unit no longer operates correctly,
-
if objects have penetrated inside the unit,
-
after long storage under improper conditions
Have the system checked by qualified, specialist personnel in such cases.
Installation and operation
Before installing or operating the system, ensure that you have read and understood the documentation for
other equipment connected to the unit. These contain important safety notices and information concerning
permissible applications.
Perform only the installation and operating work described in this guide. All other work beyond this may lead to
injuries to persons and damage to the system or other equipment.
Repairs and maintenance
Never open the housing of the RT-CRC1. The unit contains no parts which you can repair or replace. Ensure that
only qualified, specialist personnel (electrical technicians) are permitted to carry out maintenance or repair work.
Contents
Preface
Key Features
Product Descriptions
Installations
Operations
Specifications
