Radio Systems CT-2002 Desktop Master Driver, Руководство пользователя

Страница: 11 / 28

Radio Systems, Inc. CT-2002 Manual
Page 10
Setup Functions
The IR Remote Control is used to set various functions of the CT-2002. With the
exception of “IR Remote Disable” these selections are stored if power is lost.
1. Press the Program Button. The “PGM” Led will illuminate. Repeatedly press-
ing the Setup Button will step the CT-2002 through the 10 menu choices.
2. The selections are changed either by pressing the Time-of-Day set button or
using the numeric keypad.
3. The Setup Mode is exited (and the selections are stored) by pressing either
the Clock Button or the Timer Button.
Option one: 12/24 hour clock operation. Press the Time-of-Day set
button to toggle between 12 and 24 hour operation.
Option two: Down timer stop at zero or count negative. Press the
Time-of-Day set button to toggle between hold at 0 and go
negative.
Option three: Serial time of day format. Press the Time-of-Day set button to
toggle between Radio Systems-1 (rS1) format, Radio Systems-2
(rS2) format and SMPTE (SP) format .
“SMPTE” enable the serial input to read standard SMPTE
format (no drop frame ).
“rS1” enables the serial inputs to read Radio Systems serial
time of day format as generated by Radio Systems’ GPS,
Master, and stand-alone clocks.
“rS2” enables the serial inputs to read Radio Systems serial
time of day format as well as upstream timer displays. Note
that in this mode, the “Mem 6” and RESET keys on the IR
Remote control is retasked to allow switching between slave
and local timer functions.
Option four: Displayed time of day offset. Press the Time-of-Day set button
to select from 00 to 23 hour offset from the serial time of day
data.
Option five: IR Remote Functionality . Press the Time-of-Day set button
to
toggle between full functionality (iron), program defeat
(irPr), and no remote (irno).
In program defeat (irPr) the setup functions are locked out.
When AC power is toggled off and on, the remote returns to
full functionality.
In no remote (irno) all remote functions are ignored. When
AC power is toggled off and on, the remote returns to full
functionality. Use this function if there is more than one
clock in use in the same room.