O
WNER
’
S
M
ANUAL
•
Broken or defective product.
•
Products that operate over 100 kHz.
•
Infrared keyboards a nd infrared pointing devices (such as
mouse substitutes).
•
All products for sale and/or use outside the continental United
States, Hawaii, Alaska, or Canada.
TROUBLESHOOTING
PROBLEM:
No display at all times.
SOLUTION:
Replace batteries with four new AAA alkaline batteries.
PROBLEM:
No display when programming.
SOLUTION:
Display has turned off due to inactivity.Start programming
again and do not pause while performing instructions.
PROBLEM:
Remote Finder does not work.
SOLUTION:
Replace battery with new 9-volt alkaline battery; also
verify
Finder Receiver
is enabled (see page 39).
PROBLEM:
During programming, the bottom IR segment displays a
long flash.
SOLUTION:
An invalid entry has occurred. Check the keys to be
pressed and start program again.
PROBLEM:
How do I stop programming?
SOLUTION:
Press
once to return to the program keys screen.
Press it once more to exit completely.
PROBLEM:
The unit does not control home entertainment devices
or commands are not working properly.
SOLUTION:
Try all listed codes for the device brands being set up.
Make sure they can be operated with an infrared
remote control.
PROBLEM:
Tried
Searching For Your Code
method and still could
not find a working code.
SOLUTION:
Perform
Restoring Factory Default Settings
on page 40.
Then repeat
Searching For Your Code
on page 17.
PROBLEM:
Cannot program a macro onto
M1
~
M4
,
PWR
, or
COM
MUTE
keys.
SOLUTION:
Make sure the total number of key presses being
programmed is less than 15.
continued on next page...
Upgrade Exclusions/Troubleshooting
43
RS 8in1 Kameleon OM rev 10/9/03 4:12 PM Page 43
