8-
IN
-O
NE
R
EMOTE
P
OWERED
B
Y
K
AMELEON
SETTING THE TILT SWITCH
The RadioShack 8-in-One Remote contains a
Tilt Switch
that activates
the display when the unit is moved. If desired, you can disable it so
only pressing a key will turn on the display.
NOTE
: Disabling the Tilt Switch can help conserve battery life.
D
ISABLING
T
HE
T
ILT
S
WITCH
1. Press and hold
P
until the bottom IR segment flashes twice.
The program keys will appear:
2. Press below
OTHER
once. The
Other
programming screen will appear:
3. Using the number keys, enter
9 8 5.
The The bottom IR segment will
flash four times, confirming the
Tilt Switch
is disabled. The program
keys will appear again.
4. Exit programming by pressing
once. The display will return to the
last-selected device menu screen.
E
NABLING
T
HE
T
ILT
S
WITCH
1. Perform steps 1 and 2 of the previous section,
Disabling The Tilt Switch
.
2. Using the number keys, enter
9 8 5
. The The bottom IR segment will
flash twice, confirming the
Tilt Switch
is enabled. The program keys
will appear again.
3. Exit programming by pressing
once. The display will return to the
last-selected device menu screen.
38
Setting The Tilt Switch
RS 8in1 Kameleon OM rev 10/9/03 4:12 PM Page 38
