8-
IN
-O
NE
R
EMOTE
P
OWERED
B
Y
K
AMELEON
USING LEARNING
L
EARNING
P
RECAUTIONS
(C
ONTINUED
)
•
Learned keys can be used in macros (see
Using Macros
on page 25).
•
Do not use the following keys for learning:
P
,
SCREEN
,
M1
~
M4
,
FAV SCAN
,
COM SKIP
,
COM MUTE
, or any device key.
•
Learning capacity is approximately 16 to 25 keys, depending on
the code being learned.
•
If both learned and keymoved functions are assigned to the same
key, the last programmed function will be stored.
•
A learned function cannot be used as a source for Keymover (see
Using Keymover
on page 28).
•
Certain device codes are not learnable, including multi-frequency
types, some high-frequency ones, and other unusual formats.
•
For optimum learning, avoid high levels of ambient light such as
natural sunlight or energy-efficient fluorescent lights.
NOTE
: Please have your original remote controls handy before programming
learning. Be sure to press each teaching key within 5 seconds of the previous entry.
Otherwise, the RadioShack 8-in-One Remote will exit the programming mode.
P
ROGRAMMING
A L
EARNING
K
EY
1. Press and hold
P
until the bottom IR segment flashes twice.
The program keys will appear:
2. Press above
IR LEARN
once. The
IR Learn
programming screen
will appear:
3. Press a device key once (i.e.,
CBL
,
SAT
,
TV
,
DVD
,
AUD
,
VCR
,
AUX
, or
CD
)
to assign a mode for learning. The selected device menu screen,
including
, will be displayed.
4. Place the RadioShack 8-in-One Remote head-to-head (about 2"
apart, as shown on the next page) from your original remote
control.Also locate the key (on your original remote control) that will
serve as the teaching function.
20
Using Learning
RS 8in1 Kameleon OM rev 10/9/03 4:11 PM Page 20
