background image

14

Telephone Operation

ˆ

Telephone Operation

MAKING AND RECEIVING 
CALLS WITH THE HANDSET

To make a call, lift the handset and press

TALK

. The TALK/LOW BATT indicator on the

handset and the CHARGE/IN USE indicator
on the base light. Dial the number. 

To answer a call, lift the handset from the
base or, if the handset is away from base,
press any key to make or answer a call.

To end a call, place the handset on the base
or press 

TALK

.

ADJUSTING THE HANDSET 
VOLUME

To adjust the volume you hear through the
handset during a call, press 

VOL

 

8

8

8

8

 or 

9#

9#

9#

9#

to

increase or to decrease the volume.

Note: If you press 

VOL

 

8

8

8

8

 or 

9

9

9

9

 while the

volume is set to the maximum or lowest lev-
el, the setting does not change and you hear
three quick beeps.

SELECTING THE CHANNEL

The phone scans 30 channels (frequency
pairs used between the base and the hand-
set) and automatically selects a clear chan-
nel each time you make or receive a call.

If you hear other conversations or excessive
noise during a call, press 

CHANNEL

 to select

a different channel.

Note: If the handset is too far from the base,
the channel might not change. Move closer
to the base and try again.

ANSWERING CALLS WITH 
THE SPEAKERPHONE

To answer a call using the speakerphone,
press 

SPEAKER

. The SPEAKER indicator

lights.

To adjust the speakerphone’s volume, re-
peatedly press 

VOLUME

 

8

8

8

8

 or 

9

9

9

9

 on the

base. The volume setting from 

1

 (lowest) to

10

 (highest) appears in the message

counter window.

To end a speakerphone call, press 

SPEAKER

again.

SWITCHING BETWEEN THE 
HANDSET AND 
SPEAKERPHONE

To switch to the speakerphone while you are
using the handset, press 

SPEAKER

 on the

base. When you hear the conversation on
the speakerphone, press 

TALK

 on the hand-

set.

To switch to the handset while you are using
the speakerphone, lift the handset off the
base. If the handset is away from the base,
press 

TALK

, then press 

SPEAKER

.

USING BOTH THE HANDSET 
AND SPEAKERPHONE

If someone else is using the speakerphone,
press 

TALK

 on the handset to join the con-

versation. If someone else is using the hand-
set, press 

SPEAKER

 on the base to join the

conversation.

During the call, one person can hang up and
let the call continue at the other keypad. Or,
both people can hang up to end the call.

43-1130.fm  Page 14  Tuesday, May 30, 2000  1:22 PM

Содержание TAD 1130

























Отзывы: