background image

17

TAD Operation

Notes:

• Connecting a headset disconnects the

handset’s earpiece and microphone. 

VOL

 

8

8

8

8

 or 

9

9

9

9

 or 

MUTE

 on the handset

also controls the connected headset’s
volume.

• If you place the handset on the base to

recharge it while the headset is con-
nected, be sure the handset seats prop-
erly.

• With a headset connected, you can

make or answer calls as usual using the
keys on the handset. You can also
answer calls by pressing 

SPEAKER

located on the base.

• You can use a handset holder (available

from your local RadioShack store) to
hang the handset on your belt for
greater convenience.

ˆ

TAD Operation

SELECTING THE OUTGOING 
MESSAGE

The TAD has two prerecorded outgoing mes-
sages. One asks the caller to leave a mes-
sage: “Hello, no one is available to take your
call. Please leave a message after the tone.”
The TAD uses this message when 

REC

 

TIME

is set to 

1

 or 

4

 (see “Setting the Record

Time”).

The other recording is an announcement and
does not let the caller leave a message: “Hel-
lo, no one is available to take your call.” The
TAD uses this message when 

REC

 

TIME

 is

set to 

ANN

 (announcement only).

You can also record your own message (see
“Recording/Deleting an Outgoing Message”).
When you record your own outgoing mes-
sage, the TAD uses it for all 

REC

 

TIME

 set-

tings.

To switch between your outgoing message
and the TAD’s prerecorded message, press

OGM

. When the current message begins to

play, press 

OGM

 again. The TAD switches to

the other message and plays it.

RECORDING/DELETING AN 
OUTGOING MESSAGE

To record your outgoing message (up to 30
seconds long), hold down 

OGM

 until the TAD

beeps and 

--

 appears. When you finish

your message, press 

PLAY/STOP

 or 

OGM

.

The TAD plays back your message.

To delete your outgoing message and use
the TAD’s prerecorded messages, hold
down 

OGM

 until the TAD beeps. Then press

OGM

 again within two seconds.

SETTING THE RECORD 
TIME

Set 

REC TIME

 to 

1

4

, or 

ANN

 to determine

how the TAD will record incoming messages.

1

 — The TAD plays the outgoing mes-

sage and lets callers leave a message
up to 1 minute long.

4 — The TAD plays the outgoing mes-
sage and lets callers leave a message
up to 4 minutes long.

43-1130.fm  Page 17  Tuesday, May 30, 2000  1:22 PM

Содержание TAD 1130

























Отзывы: