background image

22

Troubleshooting

ˆ

Troubleshooting

We do not expect you to have any problems with your TAD, but if you do, these suggestions
might help.

Problem

Suggestion

Low volume or unusual sounds.

Someone has picked up another phone on the same line. Hang 
up the other phone.

Severe noise interference.

Press CHANNEL to change the channel.

Keep the handset away from computers, remote control toys, 
wireless microphones, alarm systems, intercoms, room monitors, 
fluorescent lights, and electrical appliances.

Move the handset to another location or turn off the source of 
interference.

The phone cannot be operated at a 
useful distance from the base 
because the signal becomes weak 
or noisy (handset’s range has 
decreased).

Lift the base’s antenna to a vertical position.

Be sure neither antenna is touching a metal surface.

Return the handset to the cradle, and recharge the battery pack. 
Replace the battery pack if necessary (see “Connecting, Charg-
ing, and Replacing the Battery Pack” on Page 10).

The phone does not work or works 
poorly.

Be sure the base’s phone line cord and AC adapter are correctly 
and securely connected, and the battery pack is charged.

The handset battery pack does not 
charge.

Check the charging contacts on the handset and base. If they are 
dirty, clean them with a pencil eraser.

Be sure the battery pack is connected correctly.

Replace the battery pack. 

The handset does not ring or 
receive a page.

Move the handset closer to the base.

Lift the base’s antenna to a vertical position.

Be sure the battery pack is charged. (If the battery power is too 
low, it does not have enough power to light the TALK/LOW BATT 
indicator.)

Move the base away from other electrical devices and sources of 
noise. 

The handset stops working or 
works poorly during a call.

Move the handset closer to the base.

Lift the base’s antenna to a vertical position.

Be sure the battery pack is charged. (If the battery power is too 
low, it does not have enough power to light the TALK/LOW BATT 
indicator.)

43-1130.fm  Page 22  Tuesday, May 30, 2000  1:22 PM

Содержание TAD 1130

























Отзывы: