![background image](http://html1.mh-extra.com/html/radio-shack/pro-94/pro-94_owners-manual_3455888048.webp)
48
Trunking Operation
USING TALK GROUP ID LISTS
When you program trunked frequencies into a bank (see
“Storing Trunked Frequencies” on Page 40), your scan-
ner sets up five scan lists for that one bank in which you
can store your favorite IDs. Each list can contain up to
10 IDs, for a total of 50 IDs for each trunk scanning
bank. If you use all the banks as trunking banks, you can
store 1000 IDs.
Talk group ID lists help you to organize trunking system
users into categories. For example, you might use List 1
for police IDs, List 2 for fire department IDs, List 3 for
emergency medical service IDs, and so on. Once you
store all the IDs in a list, you can scan them just as you
scan conventional channels. You can program IDs into
talk group ID lists manually, during a search, or automat-
ically.
Manually Storing Talk Group IDs
in Talk Group ID Lists
1. Select the trunking bank you want to use (see
“Searching a Trunked Bank” on Page 42).
2. After the scanner begins trunk scanning, press
MAN
. A number showing the current talk group ID
list appears at the top of the display, and bars
appear that show activity in other banks.
3. Press
MAN
again
,
then repeatedly press
8
8
8
8
or
9
9
9
9
to
select the talk group ID list location (shown at the
top of the display) where you want to store an ID.
Then press
PROG
.
4. Enter the type of ID you want to store, then press
E
.
To enter a Type I ID
, use the number keys to enter
the block number and the fleet number, then press
•
. Enter the subfleet number and press
E.
To enter an EDACS ID
, use the number keys to
enter the agency number, then press
•
. Next, enter
the fleet number and the subfleet number, then
press
E.
20-524A.fm Page 48 Tuesday, June 27, 2000 3:41 PM