10
11
Monitoring
Monitoring simply means keeping your iScan tuned to a
single object, rather than scanning through a playlist.
The most common form of monitoring is to simply press
/II
when the iScan stops on a transmission.
To return to scanning, press
/II
again.
You can also monitor a specific object by manually tuning
your iScan to the object.
To manually tune an object:
1.
Press
MENU
to access the main menu.
2.
Select
Browse Objects
and press
. The first
available playlist appears.
3.
Use the direction keys to navigate through playlists
and objects.
4.
P
ress
SEL
.
Priority Scanning
You may decide that a particular object should be checked
more frequently during scans. Your iScan checks Priority
objects more frequently than non-priority objects.
Note:
To set priority, Priority Mode must be enabled.
To enable Priority Mode:
1.
Press
MENU
to access the main menu.
2.
Select
Settings
and press
SEL
.
3.
Select
Priority Mode
and press
SEL
. A
checkmark ( ) indicates Priority Mode is active.
4.
Press
MENU
, and then press
SEL
to confirm.
To set priority objects:
1.
Press
MENU
to access the main menu.
2.
Select
Browse Objects
and press
SEL
.
3.
Use the four-direction pad to select an object and
p
ress
MENU
.
4.
Select
Priority
and press
SEL
. A checkmark ( )
indicates Priority.
5.
Press
MENU
, and then press
SEL
to confirm.
-Settings-
Save changes
Default Vals
Simple Display
Default PL:
1
Priority Mode
√
Priority
Objects
Objects
Playlists
Playlists
Objects
Objects
Playlists
Playlists
DRAFT
DRAFT
